ClapeyronMendeleev equation. The relationship between the number of moles of gas, the temperature, volume and pressure.
ClapeyronMendeleev equation. The relationship between the number of moles of gas, the temperature, volume and pressure.
The calculator below is used for ClapeyronMendeleev equation or state of ideal gas equation problems. You can find the theory below the calculator. There are also some examples of typical problems below.
ClapeyronMendeleev equation problem examples

There is oxygen at 2.3 atmospheres and 23 degrees Celsius in a 2.6liter flask.
Task: how much oxygen is in a flask?  Some amount of helium at 78 degrees Celsius and 45.6 atmospheres pressure occupies a volume of 16.5 liters.
Task: What's the volume of this gas at normal conditions? (Note that normal conditions are the pressure of 1 atmosphere and 0 degrees Celsius temperature.
We can enter this data in the calculator and choose what we want to find  a number of moles, new volume, temperature, or pressure, then input remaining data if needed and get a result.
Now some formulas
ClapeyronMendeleev equation
where
P – gas pressure (e.g. in atmospheres)
V – gas volume (in liters);
T – gas temperature (in Kelvins);
R – gas constant (0,0821 l·atm/mol·K).
The gas constant is 8,314 J/K·mol if SI is used.
As m  the mass of gas is in (kg) and M  the molar mass of gas in kg/mol, then m/M  number of moles of a gas and you can write the equation as
where n  number of moles
And it's easy to notice that the ratio
is a constant value for the same amount of moles.
And this dependence was empirically established before the conclusion of the equation. These are socalled gas laws  Boyle–Mariotte law, GayLussac law, Charles law.
Boyle–Mariotte law says:
For a fixed amount of an ideal gas kept at a fixed temperature, pressure and volume are inversely proportional
GayLussac law:
For a given mass m with a constant pressure P, the gas volume is linearly dependent on the temperature
Charles law:
For a given mass m with a constant volume V the gas pressure is linearly dependent on the temperature.
Looking at the equation, it is easy to verify the validity of these laws.
ClapeyronMendeleev equation and the experimental laws of Boyle–Mariotte, GayLussac, and Charles are valid for a wide range of pressures, volumes, and temperatures. I.e., in many cases, these laws are suitable for practical use. But do not forget that when the pressure exceeds atmospheric pressure by 300400 times or temperatures are very high, there are deviations in these laws.
Actually, the ideal gas is called "ideal" because it has no deviations from these laws.
Comentários